Ew Mice. (and how to prevent them)

We just moved apartments! Again. Going from the Finance District to Carroll Gardens in Brooklyn, you quickly learn to transition from elevators, doormen, salted streets, and doorbells. A brand new building to one built in 1890. We now have character and charm. But word on the street is, we may also have mice.

I’m not a big fan of mice. (no, really?!) While often in old buildings, they can’t be helped, you can still try hardest to ensure you don’t see their cute (and bacteria infested) faces.

So besides cleaning, keeping food in the refrigerator and out of the pantry, cleaning dirty dishes, you can also make sure all those little holes – between the floor and the walls, under the stove, in the corners – are filled up and cleaned up! If you didn’t know you had them, start looking around, and you’ll be surprised how many there are!

Here’s what you need.

– Steel wool. This is (apparently) the only thing mice can’t chew through. Ew. I researched, and the one pictured below is the best, most durable.

– A screw driver or knife or scissors to use to squish the steel wool into said holes

– Silicone caulking. If you need help with where to find this, ask someone at Ace Hardware, they’ll know which one you want. It’s silicone and water based.

– A caulking gun. You don’t need a fancy one. The $7 one is fine.

– A spatula. Like the one you would use the cover holes from old nails.

photo 2

 

First, you’ll want to make sure the holes and edges between the wall and floor are clean, dust free, and dry. You’ll just make a dirty mess if you skip this part, so don’t forget!

Then, you’ll want to stuff the steel wool into the holes. It can be sharp, it can cut through yoga pants (don’t learn that the hard way), and it can cause more of a mess. So use sharp scissors, or pull it slowly using your hands. Next, you’ll use the screw driver to help push the wool into the holes.

photo 3

 

Do you see the steel wool in both holes? You may find that the hole is actually larger than you thought. I know, this is terrifying. Keep adding steel wool ’til you no longer can. Then, and I mean technically you don’t have to do this, because  mice can’t get through the wool, but to make it visually attractive, and for peace of mind, you can then add the caulking, and cover up the holes. {insert caulking joke here]

photo 4

 

See how it kinda just squiggles out? You can use either your finger (since it’s water based) or a spatula (this is less of a mess), to smooth out the caulking gel and finish.

photo 5

 

It’s not perfect. But holler! no more mice. (let’s hope) In addition, even if the hole is so small that you can’t fit any steel wool into the crack, you can still using the caulking gun to seal the space between the wall and the floor. You may even enjoy this nasty little project. It’s quite satisfying! (just make sure to smooth it all out!)

photo 2-1

 

So keep your kitchen clean, fill in those holes, and you’re set. And please don’t use those inhumane traps – live or dead ones – because seriously, what are you then gonna do with a mouse?